Timing Loops

This ITS Chrono timing loop is compatible with all active COBRA, TAG Heuer By Chronelec, Chronelec (LS, Elite) and AMB/Mylaps transponders.It comes with a 470 Ohm resistor and 50 cm (1.4 ft) of coaxial double shielded cable.

This ITS Chrono timing loop is compatible with all active COBRA, TAG Heuer By Chronelec, Chronelec (LS, Elite) and AMB/Mylaps transponders.It comes with a 470 Ohm resistor and 10 m (32.8 ft) of coaxial double shielded cable.

This ITS Chrono timing loop is compatible with all active COBRA, TAG Heuer By Chronelec, Chronelec (LS, Elite) and AMB/Mylaps transponders.It comes with a 470 Ohm resistor and 30 m (98.4 ft) of coaxial double shielded cable.

The GPS Atom active loop is compatible only with Atom decoders and transponders. A simple, effective installation that allows you to record one or more lap times in the ATOM transponder, as you pass over this identifiable GPS loop.The ATOM GPS loop is completely autonomous and does not require a decoder at the various intermediate timing points, which is a real advantage for limiting the deployment of equipment while recovering times when passing over a standard active loop with an ATOM decoder. Kit includes GPS active loop with power supply and 25m of loop wire. Program and parameterize your loops and your transponder with ITS Decoder server DOWNLOAD ITS DECODER SERVER

Doubler for loop is helpful for connecting loop 1 of 2 decoders

Used to power an RF active loop to make it independent of the RF decoder. Indispensable for setting up intermediaries, the RF decoder being able to manage up to 8 loops simultaneously.

We no longer market this product. Substitute : ITSBP30 Passive loop 30 m TAG Heuer by Chronelec

This case is used to power an ATOM active loop or RF TAG Heuer by Chronelec. Indispensable for setting up intermediaries.

This case is used to supply one or two ATOM active loops or  TAG Heuer by Chronelec active loops. Indispensable for setting up intermediaries.